Product code: EMX7 | ID: 232481
Power mix. Suitable for a wide range of uses which need exceptional sound quality and convenient operation, the EMX7 features high efficiency power amplifiers (delivering 710 W output per channel), with overload protection. A rugged enclosure, impact resistant metal chassis and integrated handles ensures both mixers are exceptionally durable, with the versatile design easily adapting to horizontal or vertical placement. Features four mono and four mono / stereo input channels, allowing up to eight microphones and line-level input sources to be connected, with channel 4 able to be used with Hi-Z inputs. Both have two Aux Send connections for a monitoring system or external effect devices; stereo TRS phone jack outputs, speaker jacks which can be used with both TS phone and speakON plugs and REC OUT unbalanced RCA-pin output jacks. The EMX7 features a flex-type graphic equaliser Flex9GEQ. Dimensiosn: 465 x 308 x 325 mm. Weight: 9,5 kg
I/O | Inputs | TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE) |
---|---|---|
Phantom power | +48 V | |
Outputs | SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R] | |
Control and others | FOOT SWITCH : Effect Mute on/off | |
Bus | Stereo: 1, AUX: 2 (Including FX) | |
Input Channel Function | PAD | 30 dB (CH1-4) |
Hi-Z | Supported (CH4) | |
HPF | 80 Hz, -12 dB/oct. (CH1–3) | |
COMP | 1-knob COMP (CH1–4) | |
EQ HIGH | 10 kHz +15 dB / -15 dB (Shelving) | |
EQ MID | 2.5 kHz +15 dB / -15 dB (Peaking) | |
EQ LOW | 100 Hz +15 dB / -15 dB (Shelving) | |
On-board processors | DSP | SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor |
On-board amplifiers | Maximum output power @4ohms | 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W |
Maximum output power @8ohms | 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W | |
Level Meter | 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK) |
Frequency response | Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz | |
---|---|---|
Total harmonic distortion | Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF) | |
Hum & noise level | Equivalent input noise | -117 dBu (Noise is measured with A-weighting filter) |
Residual output noise | Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter) | |
Crosstalk | -85 dB (1 kHz, Measured with 1 kHz band pass filter) | |
Protection circuit | Load protection | DC-fault |
Amplifier protection | Over heat protection, Over current protection, Integral power protection | |
Power supply protection | Over heat protection, Over current protection | |
Power requirements | AC 100-240V, 50Hz/60Hz | |
Power consumption | 45 W (Idle) / 250 W (1/8 Power) | |
Dimensions | W | 465 mm (18 5/16") |
H | 308 mm (12 1/8") | |
D | 325 mm (12 13/16") | |
Net weight | 9.5 kg (20.9 lbs) | |
Accessories | Owner’s Manual, Technical Specifications, AC power cord (2.5 m) | |
Options | Foot switch: FC5, Rack-mount brackets: RK-EMX7 | |
Others | Operating Temperature : 0 to +40℃ |
(0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are at their maximum position if not specified.)
Input Jack | MIC/LINE | Hi-Z | Actual Load Impedance | For Use with Nominal | Input Level | Connector | |||
---|---|---|---|---|---|---|---|---|---|
Sensitivity *1 | Nominal Level (▼ Position) *2 | Max. Before Clip | |||||||
CH 1–4 | XLR | MIC | - | 3 kΩ | 50–600 Ω Mics | -60 dBu (0.775 mV) | -43 dBu (5.48 mV) | -15 dBu (138 mV) | Combo jack *3 (Balanced) |
LINE | - | -30 dBu (24.5 mV) | -13 dBu (173 mV) | +15 dBu (4.36 V) | |||||
Phone | MIC | - | 8 kΩ | 600 Ω Lines | -50 dBu (2.45 mV) | -33 dBu (17.3 mV) | -5 dBu (436 mV) | ||
LINE | - | -20 dBu (77.5 mV) | -3 dBu (548 mV) | +25 dBu (13.8 V) | |||||
CH 4 (Hi-Z) | Phone | MIC | ON | 1 MΩ | 10 kΩ Lines | -50 dBu (2.45 mV) | -33 dBu (17.3 mV) | -5 dBu (436 mV) | Phone jack *4 (Unbalanced) |
LINE | -20 dBu (77.5 mV) | -3 dBu (548 mV) | +20 dBu (7.75 V) | ||||||
CH 5/6, 7/8 | XLR | - | - | 3 kΩ | 50–600 Ω Mics | -60 dBu (0.775 mV) | -43 dBu (5.48 mV) | -15 dBu (138 mV) | XLR-3-31 *5 (Balanced) |
Phone | 10 kΩ | 600 Ω Lines | -20 dBu (77.5 mV) | -3 dBu (548 mV) | +25 dBu (13.8 V) | Phone jack *4 (Unbalanced) | |||
CH 9/10, 11/12 | XLR | - | - | 3 kΩ | 50–600 Ω Mics | -60 dBu (0.775 mV) | -43 dBu (5.48 mV) | -15 dBu (138 mV) | XLR-3-31 *5 (Balanced) |
Pin | 10 kΩ | 600 Ω Lines | -8 dBu (316 mV) | +10 dBu (2.45 V) | +25 dBu (13.8 V) | RCA pin (Unbalanced) | |||
CH 11/12 | Mini jack | - | - | 10 kΩ | 600 Ω Lines | -8 dBu (316 mV) | +10 dBu (2.45 V) | +25 dBu (13.8 V) | Stereo mini jack *6 (Unbalanced) |
(0 dBu = 0.775 Vrms)
*1 Sensitivity is the lowest level that will produce an output of +4 dBu (1.228 V) or the nominal output level when the unit is set to maximum gain. (All level controls are at their maximum position.)
*2 Level controls setting : Channel level controls are at their t position. Master level controls are at their maximum position.
*3 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*4 Tip = Signal, Sleeve = GND
*5 1 = GND, 2 = HOT, 3 = COLD
*6 Tip = LEFT, Ring = RIGHT, Sleeve = GND
Output Jack | Actual Source Impedance | For Use with Nominal | Output level | Connector | |
---|---|---|---|---|---|
Nominal | Max. Before Clip | ||||
STEREO OUT L, R | 600 Ω | 10 kΩ Lines | +4 dBu (1.228 V) | +20 dBu (7.75 V) | Phone jack *1 (Impedance balanced) |
AUX SEND 1, 2 | 600 Ω | 10 kΩ Lines | +4 dBu (1.228 V) | +20 dBu (7.75 V) | Phone jack *1 (Impedance balanced) |
REC OUT L, R | 600 Ω | 10 kΩ Lines | -10 dBV (0.308 V) | +18 dBV (7.75 V) | RCA pin (Unbalanced) |
(0 dBu = 0.775 Vrms 0 dBV = 1.00 Vrms)
*1 Tip = HOT, Ring = COLD, Sleeve = GND
Output Jack | Actual Source Impedance | For Use with Nominal | Output level | Connector | |
---|---|---|---|---|---|
1 kHz THD+N < 1% (CEA2006) | 1 kHz THD+N < 10% (CEA2006) | ||||
SPEAKERS A, B | < 0.1 Ω | 4 Ω Speakers | 600 W | 710 W | speakON NL4 *1 Phone jack *2 |
8 Ω Speakers | 400 W | 500 W |
(0 dBu = 0.775 Vrms)
*1 1+ = Positive, 1- = Negative
*2 Tip = Positive, Sleeve = Negative
Parameters and specifications
Number of Input Ports
Power
Rackmountable
FW
AUX IN
Microphone Input
Microphone Channel EQ
Built-in Effects
Power (Watt)
Power Supply
240V
UK/EU Power supply included
No
Made in
Malaysia
Recommended accessories
Based on the number of reviews: 2
All reviews come from verified customers who have purchased a product from us in the past.